Apc Serial Connection
Posted : admin On 9/15/2019- Apc Ups Connect To Computer
- Apc Serial Port Connection
- Apc Ups Serial Cable
- Apc Smart Ups 1000 Serial Connection
- Apc Pdu Serial Connection
I am trying to access the management interface for a APC UPS using the serial port. I used both the serial and USB cables which came with the UPS. I ordered two of these UPS, I connected one to. Jan 27, 2010 Pinout of APC Smart UPS cable and layout of 9 pin D-SUB male connector and 9 pin D-SUB female connectorAPC Part# 940-0024C, # 940-0024B, # 940-0024D or 940-1524(black cable). Compatible with most APC UPSs that have a DB9 serial port. Should work with APC PowerChute or Apcupsd(UPS Server for Linux). APC’s next-generation Connected Smart-UPS enables you to monitor your power infrastructure online, anytime - anywhere - from our secure SmartConnect web portal. The Connected Smart-UPS with a dedicated SmartConnect™ Ethernet Port makes set up easy. Apply the port settings to establish the connection. Press 3-5 times to display the username prompt. Use the default username and password of 'apc' You are now in the control console. Choose 'Network' Choose 'TCP/IP' Choose 'Boot mode' Change Boot mode to 'Manual' Set the system IP, subnet mask, and default gateway. Accept changes. . All serial numbers Cause Several issues can cause a problem with a terminal session over a serial connection. See below for some troubleshooting tips. Check the physicals – Ensure you are using the correct cable. There are several different communication cables APC manufactures. Feb 11, 2011 I know it sounds simple, and it sounds like ANYONE should be able to do this but I cannot. Monster rancher 2 gameshark. I have attempted to connect via serial cable (the APC serial cable none-the-less that I had to purchase because you can ONLY use APC serial cables.) Once connected with the serial cable, I opened hyperterminal with the suggested settings and no luck. Mar 07, 2011 I cannot get my SUA-1500 to communicate with my win7 ultimate 64bit system and can't figure out why. My serial ports check out fine using a loopback connector and other serial devices but I don't know how to veriify that the UPS serial port is working (USB works fine).
I used both the serial and USB cables which came with the UPS.
Apc Ups Connect To Computer
I ordered two of these UPS, I connected one to Server 2008 R2 machine and the other to a Windows 7 PC.
In both cases, they are visible from the Device Manager.
Under Batteries, it is listed as 'APC UPS'
Under Human Interface Devices, it is listed as 'American Power Conversion USB UPS'
I then try to connect using Putty with the following settings:
Baud: 9600
Data Bits: 8
Parity: None
Stop bits: 1
Flow Control: None
I reach a black terminal windows with a blinking green cursor but I cannot do anything.
Pressing Enter or any other keys does nothing.
I've also tried changing the Baud to 2400 and the other available Flow Control settings with no luck.